Adding to the herd...

[tinpan]

Hi Alan,

Looks like you are a having a blast. Let me know if you end up wanting to move your A6's. I might be interested in them.

Thanks

Tinpan

[alancohen]

I am indeed. I will need to thin the herd after I get situated.

As far as the A6s I will likely be breaking them up for parts. I am keeping the 288s and MRs for now. The bass cabs will likely go. But maybe not...

[Cal Weldon]

Hi Alan,

If it's not already done, put a dab of something like epoxy on the back edge of the T-nuts, where the flange meets the wood, to prevent them from loosening. If you can, use a small screw instead, but that's often easier said than done.

[alancohen]

Hi Alan,

If it's not already done, put a dab of something like epoxy on the back edge of the T-nuts, where the flange meets the wood, to prevent them from loosening. If you can, use a small screw instead, but that's often easier said than done.

Thanks for the tip, Cal. I can wick some CA in from the back. That will hold them.

From memory, the bolts are 1/4-20 pan heads. Do I want to install new t-nuts and go smaller? There is a horizontal brace to support them from the back.

[Cal Weldon]

the bolts are 1/4-20 pan heads.

I kept mine the same. I didn't see a need to change them.

[tinpan]

The bass cabs will likely go. But maybe not...

Keep me in mind if you decide to move them. I can always use a pair of bass bins